datasheet | july 2012 fiber optics | rev 2012.07 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications high performance supertrunking links high power distri bution networks redundant ring architectures fttx networks rfog applications sat-if transport dwdm node splitting features single or dual optical outputs qam loading to 1003 mhz dual power supplies, redundant & hot swappable front panel rf test point vacuum fluorescent status display omi / rf gain adjustment agc select: cw, video, manual (no agc) industry leading field adjustable sbs suppression the j-type medallion 6000 series this product line is a family of st ate-of-the-art high performance 1550 nm externally modulated catv fiber optic tran smitters optimized for varying network applications. packaged in convenient 1ru housing, this line of optical transmitters couples high optical output powers, up to 10.0 dbm, with low optical line width resulting in unmatched performance. the optical modulator, combined with proprietary pre-distortion circuitry, pr ovides superior ctb and cso performance with sbs suppression levels of greate r than 17 dbm for sat-if applications. advanced features such as built in field adjustable sbs control allow these transmitters to be quickly optimized in the field for any link or application without the need to procure specifically tuned tr ansmitters. this affords the system designer a level of flexibility previously unknown in the catv market place. the j-type series are designed as a high performance solution for applications where the simultaneous transport of catv and sat-if fm signals is required. the sat-if signals can be applied anywhere in the 950 to 2800 mhz band. j-type transmitters are specially design ed and optimized to support optical fiber links of up to 150kms for the japanese market place. . j-t y pe medallion 6000 1550 nm externally modulated transmitter
datasheet | july 2012 fiber optics | rev 2012.07 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. optical characteristics property units models comments performance (note 1-8) 6000-j01 6000-j02 specified link length l (km) 25 25 channel plan ntsc 80-ch pal 60-ch with 36 qpsk carriers from 950 to 2800 mhz optical output power po (dbm) 8.5/8.5 8.5/8.5 min. 10 dbm version avail. see chart noise bandwidth bw (mhz) 4 5 sbs suppression (dbm) 15.0 15.0 min. catv carrier to noise ratio cnr (db) 51.0 51.0 min. catv composite second order cso (dbc) -65 -65 max. port 1 catv composite triple beat ctb (dbc) -65 -65 max. @ +25 ? c catv composite triple beat ctb (dbc) -64 -64 max. @ 0 o c to 50 o c sat-if carrier to noise ratio cnr (db) 27 27 min. sat-if intermodulation products (dbc) -35 -35 max. port 1 sat-if spurious products (dbc) -38 -38 max. notes: 1. unless stated otherwise all specifications appl y over full temperature range with no digital loading. 2. unless stated otherwise specifications apply for nominal rf input level as defined below, after a 30 minute stabilization period. 3. specifications separated by a slash are port1 / port 2. 4. units are tested per the te st / link configuration table 5. noise figure for the edfa = 4.5 ~ 5.5 db 6. corning smf-28 single mode fiber 7. receiver responsivity is 0.95 ma/mw, equivalent noise current is 7 pa/(hz)1/2 8. with 36 qpsk modulated sat-if signals between 950 2800 mhz. 27 mhz if bandwidth test/link configuration property edfa link received power 2 j-type 14 dbm 25 km 0.0 dbm at the receiver j-t y pe medallion 6000 1550 nm externally modulated transmitter
datasheet | july 2012 fiber optics | rev 2012.07 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. electrical specifications property requirement comments catv nominal input power 19 dbmv/c h (79 dbuv/ch) 80 ntsc channels catv input range 17 ? 27 dbmv/ch (77 ? 87 dbuv/ch) optimum performance at nominal input catv composite level -10.9 dbm 0 db on fp display catv rf gain / omi adjustment range +2 / -8 db from nominal setting catv performance may vary slightly over range catv frequency range 45mhz ? 1003 mhz catv flatness +/- 0.50 db 45mhz - 550mhz +/- 0.75 db 45mhz ? 1003 mhz catv flatness ? n-type +/- 0.75 db 45mhz ? 1003 mhz n-type catv input impedance 75 ? catv input return loss 16db min 45mhz ? 1003 mhz catv front panel rf tap -20 +/- 1 db down from rf input catv front panel rf tap flatness +/- 1 db 45mhz ? 1003 mhz sat nominal input power 27 dbmv/ch (87 dbuv/ch) 36 qpsk sat-if channels sat input range 22 ? 32 dbmv/ch (82 ? 92 dbuv/ch) optimum performance at nominal input sat composite level -6.2 dbm 0 db on fp display sat-if rf gain / omi adjustment range +5 / -5 db from nominal setting catv performance can vary slightly sat-if frequency range 950mhz ? 2800 mhz sat-if flatness +/- 2 db sat-if input impedance 75 ? sat-if input return loss 10db min 950mhz ? 2800 mhz sat-if front panel rf tap 7 +/- 2.5 dbmv/ch at nominal omi/ch sat-if front panel rf tap flatness +/- 1 db 950mhz ? 2800 mhz general and mechanical specifications property requirement comments wavelength 1550 +/-5 nm various options + itu- grid available ? see model number information channel plan various ? see specification tables custom channel plans available optical connector sc/apc other styles available monitoring interfaces 100 base-t ethernet (snmp) rear panel rs-232 interface vfd screen front panel controls vfd- (vacuum fluorescent display) operating temperature 0 ? c to 50 ? c storage temperature -20 ? c to 70 ? c power consumption 65w max j-t y pe medallion 6000 1550 nm externally modulated transmitter
datasheet | july 2012 fiber optics | rev 2012.07 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. general and mechanical specifications (continued) property requirement comments agency listings emi : en50083-2:2006 (us catv) en55022:2006 (us it) en61000-3-2 (harmonics) en61000-3-3 (flicker) fcc: part 15, subpart b, class ?a? unintentional radiators ices-003 (canada) an/nzs 3548, class a (australia) vcci, class a (japan) safety : fda/cdrh laser safety governed by code of federal regulations title 21, volume 8, part 1040 iec 60950-1 iec 60728-11 laser iec 60825-1 cb certification transportation vibration gr -2853-core in shipping package transportation shock gr-2853-core in shipping package operating humidity 20% to 85% non-condensing supply range (vac) (vdc) 90 to 265 vac, 50/60 hz +/- (36 ? 72) vdc dimensions 19.0?w x 15.0?d x 1.72?h (width includes 19? front panel ears, depth includes, connectors, fans & front panel) ? see drawing laser safety information this product meets the applicable requirements of 21 cfr 1010 & 1040 and is classified as a class 1m laser product. during use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation. th is product has been issued accession number 0820466-001. j-t y pe medallion 6000 1550 nm externally modulated transmitter
datasheet | july 2012 fiber optics | rev 2012.07 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. model number information note 3 6000 ? - logo & customer specific link type pout (dbm min) note 1 loading type optics rf wavelength (nm) power supply 0 ? emcore logo j ? 25 km d ? 10/10 for s and j type note 4 1 ? ntsc (80-ch) 1 ? sc/apc, rear 1 ? rf in rear, tp front 00 ?1555+/- 5.0nm 1 ? ac primary, no secondary 1 ? no logo e ? 8.5/8.5 for j type 2 ? pal (60-ch) 2 ? fc/apc, rear 2 ? rf in front, tp front 01 ? 1550+/- 5.0nm 2 ? dc primary, no secondary 3 ? e2000/apc, rear 3 ? rf in front, tp rear xx ? itu channel +/- 0.1nm note 2 3 ? ac primary, ac secondary 4 ? sc/apc, front 4 ? rf in rear, tp rear 4 ? ac primary, dc secondary 5 ? fc/apc, front 5 ? dc primary, dc secondary 6 ? e2000/apc, front note 1: options available for indicated types only. note 2: itu grid wavelengths can be specified from channel 18 to 40. note 3: not all configurations are available, contact factory. note 4: cso port 2 degraded by 1db note 5: contact factory for model type availability additional kits g3708-006-001 - replaceable ac power supply modules g3708-005-001 - replaceable dc power supply modules g7914-076-001 - replaceable blank power module plate g7906-008-001 - replaceable fans j-t y pe medallion 6000 1550 nm externally modulated transmitter
|
